Photo Development Chemicals

What products do I need to develop the photos? ?

I do not know what I should and fixer, and I do not know if that's all I need. I think I need clear hiccups too. Http://www.adorama.com/catalog.tpl?op=itemlist&cat1=Film% 20% 26% 20DarkRoom & cat2 =% 20Chemicals Photo & photo_chemicals Sterm = & sid = 1233117787889833 HELP please, I need to develop films and photos. black and white 35 mm film, also, I get a print washer?

If you develop 35mm film in black and white, you need a number of things. You will need a developing tank, designed for film 35mm. That's all, plus a pair of scissors and opened the bottle cap. As for the range of chemicals, fixer, Kodak is the cheapest and easiest find, so not much thought put into it. The developer is where the real decision to be made. Some people spend many months or even years, finding The good developer and test to your liking. Personally, I would suggest something along the lines D76 and HC-110. Then it can spread to other developers as Rodinal, Diafine, Perceptol, etc. The film is another area where you need to discover what is best for you. There are dozens to choose from, like Tri-X Pan, HP5 Plus Pan F, Acros, just to name a few. To develop your film, you have to do in a darkroom. The steps something like this: 1. Developer 2. Stop Bath (the water) 3. Set 4. Battery Stop (water) 5. Wash, about 5 minutes 6. Photo Flo 7. Hang film to dry in real terms, goes something like this: Remove the end of the film boat with the first game of the bottle cap is why you need a Dark Room, and you must complete the following steps in the dark. It is good practice a few times before. Cut the tape holding the film reel of the movie, then load the film onto the reel in development. Place the film loaded in the tank development and close the lid. At this point you can turn on the lights. Then pour the developer. The developer temperature should be at 68 degrees F. If you need to compensate, apply a shirt with water, ie, a hot tub or cooler for the developer to 68 degrees. Development for the prescribed time, then empty chemicals. Applying the stop bath. Then add the cream. Fix the film for about 10 minutes. Then recycle the fixer. Apply the stop bath again and rinse for 5 minutes. Then add the photo flo diluted to keep the film to get water spots. The final step is to hang the film to dry. As Film for printing, you'll need an enlarger, security lighting, an easel and a timer. You will also need several plates in development and more chemicals and printing paper. This part is almost like the development of the film, so it's not too hard to get the hang of.

How to Develop Black and White Photos : How To Use Hypo Clearing Agent

Kodak hypo clearing agent – makes 5 gallons $10.00

Kodak hypo clearing agent $3.35

Kodak Hypo Clearing Agent 153 3942 Makes 1.25 Gallons $7.99