Gal Powder
Tile grout, the simplest instruction guide for great results
Part 1 of 3 series.
Here the tile Single wall grout excellent results Guide to impress your husband, boss, and you.
Materials and tools: Depending on the size of the bathroom, the tile and joint size (1 / 16, ¼ or ½ inch), whether you need to use a slurry of sand or mortar sand wall tile floor too. Check the boxes to the store and make sure you get the glory. Again, no sand slurry wall for different sizes 1 / 16-1 / 8 grout "no more than 1 / 8 "requires sand (ground slurry)
- Tile grout saw to remove and clean the joints (very important)
- Abrasive Bathroom (Ajax, Comet, etc)
- Scotch-Brite ® pad
- Razor blade scraper
- Grout sponge (not just any sponge, very important)
- Airbag Wall Grout
- Clean plastic bucket about 2 gallon is ideal.
- Many fresh and clean water
- Vacuums
Wall Tile Grout
1 .- Using the ceramic slurry saw, begin the work of scraping and lines on the top of the wall section should be done first, by removing as much material as possible to get clean lines.
2 .- The work of the corners tub and scraped together and clean all related materials, or silicone caulk.
3 .- vacuum area and begin to wash the tile wall with dust cleaning, be careful around the soap dish, cranes, equipment and parts.
4 .- The sections of the wall Rinse well and leave wet.
5 .- Use plastic bucket mix grout according to directions of manufacture.
6 .- Distribution of the mixed grout as rubber float through the pictures in a diagonal movement in the joints completely, but just leaving the floor clean.
7 .- Cover only one section can float in the grout and cleaning in 30 minutes at a time. Never attempt to grout the walls at once.
8 .- Once a section begins with the trowel, lines begin to work with the grout sponge, wet the sponge with clean, fresh water, wring almost dry, remove the elegant lines and allow the grout to fill joints completely at this stage, the lines must be clean and straight and remain the grout into the tile itself, but the opacities be removed later when dry.
9 .- Once you complete all sections of walls and cleaning of all excess grout line and they look great and feel dry to the touch to begin final cleaning with a dry cloth until all the smoke was removed and the wall is clean and bright.
10 .- The caulking around the bathtub of this work is best explained in a separate note, see: "How-to-Caulk-tub-a-like-a-PRO!
About the Author:
Orlando Salazar is the founder and President of Bathtub Doctor, Inc. a division of Corporate Bath Systems, Inc.
He can be reached at:
Bathtub Doctor, Inc.
180 Wantagh Ave.
Bethpage, NY 11714
USA
516-931-8311 Fax 516-776-9623
http://bathtubdoctor.com
http://twitter.com/tubdoc http://tubdoc.wordpress.com
Article Source: ArticlesBase.com – Tile grouting, the simplest How-to-guide for great results
Bald E-Gal Cup with Jake Olson-Elm
